Contact Us Here: doors@911-doors.com | 713.319.8662
DIY Door Refinishing: Common Mistakes to Avoid

Date

Whether you want to improve the look of your home’s interior or exterior, refinishing your doors is a great place to start. It will not only improve the appearance of your home, but it will also be a fun DIY project to complete. There are, however, certain frequent blunders that individuals make while refinishing doors that might result in less-than-ideal outcomes. In this blog, we’ll look at these blunders and offer advice on how to avoid them.

Mistake #1: Skipping the Prep Work

Skipping the prep process is one of the most common mistakes people make while refinishing doors. Sanding down the door and eliminating any previous finishes is critical for achieving a smooth, even surface. If you skip this step, your finish will be blotchy and uneven, with some sections looking shinier than others.

Take the time to properly prepare your door to prevent making this error. Sand down any old finishes, making sure to sand with the grain of the wood. Before proceeding to the next step, use a tack cloth to clear any dust or dirt from the door.

Mistake #2: Failure to Use Appropriate Tools

Another mistake people make when refinishing doors is failing to use the proper tools. Using the incorrect paintbrush or roller can result in an uneven finish or paint streaks. Applying low-quality paint might also result in a dull or streaky surface.

Invest in high-quality tools and paint to avoid making this mistake. Employ a paintbrush or roller suited for the sort of paint you’re using, and make sure you use paint designed for the type of door you’re repairing.

Mistake #3: Applying Too Much Paint

Another common blunder when repainting doors is using too much paint. This can result in drips and runs in the paint, as well as a thick and clumpy finish.

To avoid making this error, use thin, even applications of paint. Allow each coat to dry completely before moving on to the next. This will assist you in achieving a smooth, even finish with no drips or runs.

Mistake #4: Not Allowing Enough Drying Time

Finally, when refinishing doors, another common mistake is not allowing enough drying time between applications. Rushing through the process can result in an uneven or sticky finish.

To prevent making this error, allow each coat to dry completely before proceeding to the next. Be patient and follow the manufacturer’s recommended drying time. It may take longer than expected, but the ultimate outcome will be well worth the wait.

Refinishing your doors can be a fun and gratifying DIY project, but it’s critical to avoid these frequent blunders. Provide enough drying time between layers and carefully prep your door. You can obtain a beautiful finish that will enhance the appeal of your home for years to come with a little time and attention to detail.

More
articles